Hoppa till innehåll
Free shipping on orders over 3000 SEK excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Shiny solder joints and uneven surfaces: how to get a measurable image without glare and blurry edgesLive Full HD Image Straight on the Screen: Skip the Computer When Inspecting Small DetailsThe measurement field no one sees: when magnification is entered by hand, the measurement goes wrongFrom suspected damage to a measurable image: a digital microscope that works with or without a computerSharp images and measurements on an uneven, glossy surface: how to solve what a magnifier and the naked eye can’tReflections hide the defect: how to inspect shiny metal and plastic surfaces without glareReflections in shiny metal hide the flaw: how to see the surface with polarized light and measure directly in the imageCrack magnifier with a stainless steel scale: how to tell whether the crack is 0.2 mm or 0.4 mmMeasurement errors in microscope images often start with a magnification that someone forgot to recordShiny metal surfaces hide defects behind reflections – here’s how to see them anyway at the benchVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Shiny solder joints and uneven surfaces: how to get a measurable image without glare and blurry edgesLive Full HD Image Straight on the Screen: Skip the Computer When Inspecting Small DetailsThe measurement field no one sees: when magnification is entered by hand, the measurement goes wrongFrom suspected damage to a measurable image: a digital microscope that works with or without a computerSharp images and measurements on an uneven, glossy surface: how to solve what a magnifier and the naked eye can’tReflections hide the defect: how to inspect shiny metal and plastic surfaces without glareReflections in shiny metal hide the flaw: how to see the surface with polarized light and measure directly in the imageCrack magnifier with a stainless steel scale: how to tell whether the crack is 0.2 mm or 0.4 mmMeasurement errors in microscope images often start with a magnification that someone forgot to recordShiny metal surfaces hide defects behind reflections – here’s how to see them anyway at the bench

KITOZOOM PPL-B Parallel Light Source: Why Diffuse Backlighting Gives You a 5-15 μm Undersized Diameter, and How a Fresnel Lens with Blue LED Fixes It

Published July 9, 2026 at 22:45

A scenario every precision workshop recognizes: you place a Ø6.000 mm precision pin on the KITOZOOM video microscope’s X-Y stage, measure the diameter with the video crosshair measurement function, and get 5.985 mm. You take the same pin and measure it with a Mitutoyo micrometer — 5.997 mm. Difference: 12 micrometers. Who’s right?

The micrometer is right. The video microscope is lying — and the cause isn’t calibration, pixel resolution, or crosshair technique. The cause is the physics of how light behaves at an edge.

Edge-crawling: when light creeps around the object

When you use standard diffuse backlighting on a rotationally symmetric object (pin, wire, drill, tap shank), the object is illuminated from all angles simultaneously. Light arriving at a 45° angle from below strikes the object’s edge — and part of that light diffracts AROUND the edge and reaches the camera sensor above the object’s contour.

Consequence: the edge looks softer than it actually is. The silhouette becomes a gradual transition from dark to light instead of a sharp line. When the operator (or the auto-edge-detection algorithm) places the crosshair line at the ”first dark pixel,” it ends up several micrometers INSIDE the object’s true edge. At every edge. On both sides of the object. Net result: measured diameter is 5-20 μm smaller than the true diameter.

This source of error is called ”light creep” or ”edge diffraction error” and has been known in optical metrology since the 20th century. It exists regardless of display calibration or camera resolution.

Parallel light: the optical solution

If you can guarantee that ALL light reaching the object comes STRAIGHT FROM BELOW — i.e., in rays parallel to each other and perpendicular to the X-Y plane — no light will be able to diffract around the edge. Every ray blocked by the object is blocked completely. Every ray passing beside the object passes through untouched. The silhouette becomes binary: completely dark inside the object’s contour, completely light outside.

This is the principle behind ”telecentric backlighting” or ”parallel transmitted light.” PPL-B (Parallel Light Bottom-B) is exactly such a light source, built specifically for the KITO 20/30/40 video measuring microscopes.

PPL-B technical construction

Here’s how the PPL-B is built inside the housing:

  1. Blue LED array: The source is a blue LED. The reason blue was chosen: shorter wavelength (~450 nm) gives less diffraction according to the Rayleigh criterion. Blue is at the border of violet — shorter wavelengths would be even better, but UV LEDs are more expensive and require protective glass.
  2. Semi-transparent mirror: The light from the LED is reflected by a mirror at a 45° angle that folds the light path. This allows the LED module to sit horizontally to the side while the light is directed straight upward.
  3. Fresnel lens: The light from the mirror passes through a Fresnel lens that converts the diverging light from the LED point source into a parallel beam. Fresnel lenses are more efficient than conventional plano-convex lenses for this function since they can be made thin and large in diameter at the same time.
  4. Output aperture: The light leaves the PPL-B as a parallel beam up through the opening in the KITO’s base plate. The object on the X-Y stage is illuminated from above by this parallel beam.

KITOZOOM PPL-B parallel light source for video microscope

Why blue light and not white

White light contains all wavelengths from 400 nm (violet) to 700 nm (red). When white light passes through the Fresnel lens, it creates chromatic aberration: different wavelengths bend by different amounts and converge at different points. The result is that the lens cannot produce perfectly parallel light for all colors simultaneously.

Monochromatic light from an LED with a narrow wavelength band eliminates this aberration. Blue is chosen because:

  • Shorter wavelength gives less diffraction at the edge.
  • Blue LEDs are well-established, inexpensive, and long-lived (100,000+ hours).
  • Blue light has high contrast against the object’s shadow.
  • Standard CMOS cameras have good sensitivity to blue (450 nm falls in the sensor’s sweet spot).

Measurement error with and without PPL-B — concrete figures

Precision metrology tests on ATC-manufactured precision pins typically give:

  • Ø1 mm object, standard diffuse light: measured 0.988-0.993 mm. Error 7-12 μm.
  • Ø1 mm object, PPL-B parallel light: measured 0.999-1.001 mm. Error 1 μm, within measurement accuracy.
  • Ø10 mm object, standard diffuse light: measured 9.986-9.994 mm. Error 6-14 μm.
  • Ø10 mm object, PPL-B parallel light: measured 9.998-10.001 mm. Error 2 μm, within measurement accuracy.

The error from edge-crawling is on the order of 5-15 μm regardless of the object’s size — it’s an absolute error magnitude, not a percentage. For a 20 mm measurement, 10 μm is 0.05%; for a 1 mm measurement, the same 10 μm is 1%. This means PPL-B adds the most value on small objects.

When PPL-B is critical

Rotationally symmetric precision parts: Pins, drills, wire, spindles, pistons. Diameter measurement where ±5 μm level is required.

Ophthalmology and medical technology: Precision parts for cannulas, syringes, drip sensors. Tolerances of 5-10 μm are standard in this sector.

Gear QC: Module measurement on small gears (0.3-0.8 mm module) where diffraction is an unacceptable share of the tolerance.

Thread diameter verification: Thread tolerance typically ±0.02 mm — a 10 μm edge-crawl error is 25% of tolerance. Critical.

Wire manufacturing: Wire diameter is a final QC measurement. Microscopic deviation affects electrical resistance and mechanical properties.

When PPL-B is unnecessary

Coarse measurement (>1 mm tolerance): On CNC-milled semi-finished parts or cast components with tolerances at the tenth-of-a-millimeter level, the 10 μm edge-crawl error is negligible. Standard diffuse light is sufficient.

2D-projected contours: If you’re measuring two-dimensional contours (e.g., stamped sheet metal parts in profile) where no part of the object projects upward from the X-Y plane, diffuse light is adequate.

Color inspection: For inspecting print, engravings, or color defects, white diffuse light is needed to see the color. PPL-B is monochromatic blue.

Compatibility with KITOZOOM models

PPL-B is supplied for the KITO 20, KITO 30, and KITO 40 video microscope base plates — these models have an output aperture in the table where light from the PPL-B comes up. For other video microscopes (Dino-Lite, Peak Lupe series), PPL-B does NOT work without mechanical adaptation of the table.

PPL-B is not compatible with:

  • Handheld Dino-Lite microscopes (too small, no X-Y stage with aperture).
  • Optical stereo microscopes.
  • Peak Lupe 2054/2064 measuring microscope series.

What you get for your money

KITOZOOM PPL-B parallel light source, blue LED array (~450 nm), semi-transparent mirror for 90° light path redirection, Fresnel lens for parallel beam shaping, compatible with KITO 20/30/40 video microscope base plates, no extra power supply required (connects to the KITO base’s 12 V outlet). 22,111 kr.

The premium of 20,000+ kr over standard diffuse transmitted light is justified solely by the gain in measurement accuracy. For a workshop where the 5-15 μm errors from edge-crawling are a production concern, PPL-B is critical. For general-purpose inspection without tight-tolerance requirements, it’s an over-investment.

Read more: KITOZOOM PPL-B parallel light source in the shop →

More news

All news