Hoppa till innehåll
Free shipping on orders over 3000 SEK excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Shiny solder joints and uneven surfaces: how to get a measurable image without glare and blurry edgesLive Full HD Image Straight on the Screen: Skip the Computer When Inspecting Small DetailsThe measurement field no one sees: when magnification is entered by hand, the measurement goes wrongFrom suspected damage to a measurable image: a digital microscope that works with or without a computerSharp images and measurements on an uneven, glossy surface: how to solve what a magnifier and the naked eye can’tReflections hide the defect: how to inspect shiny metal and plastic surfaces without glareReflections in shiny metal hide the flaw: how to see the surface with polarized light and measure directly in the imageCrack magnifier with a stainless steel scale: how to tell whether the crack is 0.2 mm or 0.4 mmMeasurement errors in microscope images often start with a magnification that someone forgot to recordShiny metal surfaces hide defects behind reflections – here’s how to see them anyway at the benchVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Shiny solder joints and uneven surfaces: how to get a measurable image without glare and blurry edgesLive Full HD Image Straight on the Screen: Skip the Computer When Inspecting Small DetailsThe measurement field no one sees: when magnification is entered by hand, the measurement goes wrongFrom suspected damage to a measurable image: a digital microscope that works with or without a computerSharp images and measurements on an uneven, glossy surface: how to solve what a magnifier and the naked eye can’tReflections hide the defect: how to inspect shiny metal and plastic surfaces without glareReflections in shiny metal hide the flaw: how to see the surface with polarized light and measure directly in the imageCrack magnifier with a stainless steel scale: how to tell whether the crack is 0.2 mm or 0.4 mmMeasurement errors in microscope images often start with a magnification that someone forgot to recordShiny metal surfaces hide defects behind reflections – here’s how to see them anyway at the bench

Live Full HD Image Straight on the Screen: Skip the Computer When Inspecting Small Details

Published 16 November 2026 at 05:43

You are holding a circuit board, a ground surface or a seal in one hand and a magnifying glass in the other. The defect may be visible, but only to you, and only if you stand at the right angle. If a colleague needs to assess the same thing, you have to hand over the magnifier and hope that you both see the same thing. If you also want to document it, you need a computer to start up, a program to open and a camera to be detected.

Dino-Lite EDGE PLUS, enbart HDMI, polarisator, metall

What the product is

The Dino-Lite EDGE PLUS AM6218MZT is a handheld digital microscope with 10x–220x magnification. It has an HDMI output that delivers Full HD, 1080p, at 60 frames per second. You connect it directly to a monitor, and the image is displayed with no computer in between. The optics are housed in a robust anodized aluminum casing with EMI shielding.

What problems it solves

The first problem is that the image becomes visible to more than one person. On a screen, the operator, quality manager and technician can look at the same detail at the same time and point to what they mean. The second is reflections. Shiny metal surfaces, solder points and painted parts produce glare that hides exactly what you are looking for. The microscope has an adjustable polarizer that removes much of it. The third is time. Without a computer there is nothing to start or install, and the Microtouch sensor in the casing lets you freeze the image with a single press. A long press turns the light on and off.

When and why it is used

It suits situations where inspection is a recurring task and bench space is limited. The high frame rate means the image keeps up when you move the object or adjust the focus, which is essential when the part needs to be rotated under the light.

Three areas of use

Electronics: Inspection of solder joints, component leads on circuits and traces on circuit boards. With the polarizer, you can see the difference between a shiny, good joint and a cold joint, without the reflection taking over.

Manufacturing industry: Assessment of edges, wear and surface damage on tools, threads and ground surfaces. The frozen image can be shown to the operator at the machine before a decision is made on replacement.

Food production: Spot checks of seals, welded seams in packaging or suspected particles on a surface. The metal casing withstands what tougher production environments demand, and a screen at the inspection station means several people can approve the same assessment.

Why it pays off

Do the math on the time. If an inspection goes from three minutes of preparation to a few seconds, and is done several times a day, the gain quickly exceeds the price. Just as important, the discussion about what is visible disappears when everyone sees the same image. Fewer misjudgments and fewer unnecessary re-inspections mean lower scrap costs and fewer complaints. There is also no computer to maintain, update or move between stations.

If you want to see the specifications and all the details about the AM6218MZT, you can find them on the product page.

Read more

More news

All news