Hoppa till innehåll
Free shipping on orders over 3000 SEK excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Shiny solder joints and uneven surfaces: how to get a measurable image without glare and blurry edgesLive Full HD Image Straight on the Screen: Skip the Computer When Inspecting Small DetailsThe measurement field no one sees: when magnification is entered by hand, the measurement goes wrongFrom suspected damage to a measurable image: a digital microscope that works with or without a computerSharp images and measurements on an uneven, glossy surface: how to solve what a magnifier and the naked eye can’tReflections hide the defect: how to inspect shiny metal and plastic surfaces without glareReflections in shiny metal hide the flaw: how to see the surface with polarized light and measure directly in the imageCrack magnifier with a stainless steel scale: how to tell whether the crack is 0.2 mm or 0.4 mmMeasurement errors in microscope images often start with a magnification that someone forgot to recordShiny metal surfaces hide defects behind reflections – here’s how to see them anyway at the benchVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Shiny solder joints and uneven surfaces: how to get a measurable image without glare and blurry edgesLive Full HD Image Straight on the Screen: Skip the Computer When Inspecting Small DetailsThe measurement field no one sees: when magnification is entered by hand, the measurement goes wrongFrom suspected damage to a measurable image: a digital microscope that works with or without a computerSharp images and measurements on an uneven, glossy surface: how to solve what a magnifier and the naked eye can’tReflections hide the defect: how to inspect shiny metal and plastic surfaces without glareReflections in shiny metal hide the flaw: how to see the surface with polarized light and measure directly in the imageCrack magnifier with a stainless steel scale: how to tell whether the crack is 0.2 mm or 0.4 mmMeasurement errors in microscope images often start with a magnification that someone forgot to recordShiny metal surfaces hide defects behind reflections – here’s how to see them anyway at the bench

From suspected damage to a measurable image: a digital microscope that works with or without a computer

Published 13 November 2026 at 05:23

You hold a part up under the work lamp and see that something isn’t right. Maybe a scratch, a seam or a solder joint that looks bad. But shiny metal surfaces reflect the light straight into your eye, and with the naked eye or an ordinary magnifier it is impossible to tell whether it is real damage or just a reflection pattern. Without an image to show, the discussion with a colleague or customer also easily turns into a matter of opinion.

Dino-Lite EDGE PLUS, 2.0 Mpixels, measurement function, automatic magnification reading, FLC, EDR, polarizer, metal, HDMI & USB-C

What it is

Dino-Lite EDGE PLUS AM62518MZT is a handheld digital microscope with magnification from 10x to 220x and a 2 megapixel sensor. The housing is made of anodized aluminum with EMI shielding. The microscope has two outputs: HDMI for a real-time Full HD 1080p image directly on a screen without a computer, and USB-C for connecting to a computer, where images, video and measurements are handled in the software. Please note that HDMI and USB cannot be used at the same time.

What problems it solves

The built-in adjustable polarizer removes glare from shiny surfaces, so you see the surface itself instead of the reflection. With eFLC you control the light intensity of two LED groups in 32 levels each, and EDR combines images with different exposures so that both dark and bright areas show visible detail. The automatic magnification reading (AMR) function registers the magnification and saves it with the image. This makes measurements faster and more traceable, since you don’t have to recalibrate by hand every time you change the zoom.

When it is used

The microscope suits situations where a snapshot needs to become documentation: during incoming inspection, troubleshooting, complaints and documentation of wear. HDMI mode works well at the workbench when several people need to look at the same image. USB mode is used when you need to measure, save and attach the result to a report.

Three practical examples

Electronics: Inspection of solder joints, shorts between pins and trace damage on circuit boards. The polarizer makes it possible to assess shiny solder surfaces, and an image in measurement mode shows exactly how large a defect is.

Manufacturing: Edge inspection of machined parts, burrs, cracks and tool wear. You can see whether a cutting edge is worn before it causes dimensional errors, and compare with earlier images.

Food production: Inspection of seals, cutting tools and stainless steel surfaces where damage and deposits are otherwise difficult to detect. A documented image makes self-inspection and the dialogue with maintenance easier.

Why it pays off

The cost of a digital microscope is small compared with a misjudgment that leads to scrapped batches, an unnecessary complaint or a machine stoppage. The time savings are concrete: you see, measure and save in the same step, and avoid sending parts to a lab for simple checks. With HDMI mode, no computer is needed at the bench, which lowers the threshold for actually using the instrument every day. Image documentation with magnification and dimensions also means that decisions can be followed up afterwards.

If you want to see the specifications and compare them with your own inspection situation, the full product information is available from us.

Read more

More news

All news