Published 15 October 2026 at 11:19
Someone points at a crack in a concrete wall or at the edge of a milling cutter and asks whether it is worth dealing with. The answer is often a guess by eye: ”about half a millimeter”. A guess by eye cannot be documented, and it cannot be compared with the next inspection. This is where a crack magnifier with a scale makes a difference.
What is a crack magnifier?
The RL-12 crack magnifier is a handheld metal measuring magnifier with 12x magnification. The optics are aplanatic and distortion-free, so the scale and the object look straight all the way out to the edge of the field of view, which is 12 mm. You set the focus by sliding the lens system up or down. The working distance is 6 mm, and the whole instrument weighs 36 grams.
What sets it apart from an ordinary measuring magnifier is the scale. It is etched in stainless steel with a graduation of 0.05 mm and a line width of 0.01 mm. It sits at the bottom of the magnifier at a 45° angle. The angle lets in light and reduces reflections, which makes the scale easy to read even on shiny or uneven surfaces.
What problem does it solve?
Glass scales scratch easily when pressed against rough or hard surfaces. A steel scale withstands that kind of handling, which is why the magnifier can be used directly against tools, castings and concrete. You place the scale over the crack, focus and read off the width. The result is a measured value that can be entered in a report.
Three areas of use
Manufacturing industry. The magnifier is particularly well suited for inspecting the cutting edges of drill bits and milling cutters. You can see chipping, wear on the chamfer and microcracks before the tool leaves a poor surface on the workpiece.
Construction and civil engineering. Technicians use it to measure crack widths in concrete. With a marked measuring point and a date, the same crack can be measured again at the next inspection, so you can see whether it is growing or stable.
Maintenance and quality control. On cast and welded parts, sealing surfaces and edge damage, the scale determines whether the deviation is within tolerance. A clear number can be discussed with the supplier, whereas ”it looks a bit large” cannot.
Why it pays off
The magnifier is a small instrument, but it replaces guesswork that can become expensive. A worn tool that is replaced in time saves scrapped parts. A crack that is measured repeatedly can either be written off as harmless or dealt with before the damage grows. Without a measured value, you risk taking action too early or too late. The magnifier needs no battery, no computer and no software calibration. It fits in your pocket, which means it actually gets used. If needed, LED illumination is available as an option and spare scales can be ordered separately.
If you currently judge cracks and edges by eye, there is a simple improvement. Read more about the RL-12 crack magnifier and see whether it suits your inspections.