Published 12 October 2026 at 19:05
Someone holds a part up to the light and says the scratch is about a tenth of a millimeter. Someone else thinks it is twice as wide. Without a measurement it becomes a matter of opinion, and the part either ends up in the reject bin unnecessarily or moves on even though it should have been stopped. It is a situation most people who work with quality, maintenance or production will recognize.
What it is
The Peak Lupe 2028 is a handheld measuring loupe with 10x magnification and a built-in glass scale with 0.1 mm graduation. This means you see the object and a measuring scale in the same image. The loupe is focusable, has achromatic, distortion-free optics and anti-reflection coated lenses. The field of view is 34 mm and the working distance is 30 mm. It is supplied with a detachable LED light and a storage case. Batteries are not included. The loupe weighs 26 grams including batteries and fits in the pocket of your work trousers.
What problem it solves
An ordinary magnifying glass shows that something is wrong but not by how much. A measuring loupe gives a value that can be documented and compared against a tolerance limit. The built-in illumination removes another common problem, namely poor or shadowy light at the machine, in the electrical cabinet or during an installation. Because the scale is built into the loupe, you measure directly on site, without moving the part.
How it is used in practice
In the manufacturing industry, the loupe is used to assess scratches, crack width, wear on cutting edges and edge chipping. You read off whether a defect is within or outside the permitted limit and can note the measurement in the deviation report.
In electronics, it is useful for checking trace widths, pad spacing and solder bridges on circuit boards. It is quick to see whether a gap is sufficient, and no microscope station is needed for an initial assessment.
In food production and packaging, it is used for complaints and for checking printing and seals. The size of a foreign particle or a halftone dot in a print can be read off directly, which makes it easier to decide whether a deviation is relevant.
The scales can be replaced. The standard scale is included, but there are fifteen black and fourteen white scales, for example with rulers, circles or angles, so the loupe can be adapted to your own inspection.
Why it pays off
The financial value lies in fewer misjudgments. Every part that is rejected without grounds is a cost, and every deviation that is let through can become a more expensive complaint further down the line. With a measured value instead of an estimate, both unnecessary stoppages and missed defects are reduced. Time is also saved when the inspection can be done at the workstation and does not require transport to a measuring room or an external assessment. For an instrument in this price range, it is a short path to benefit.
If you need to be able to demonstrate measurement uncertainty, calibration certificates can be ordered for the related model Peak Lupe 1983, which is worth knowing if the inspection is part of a quality system.
If you want to see all specifications and available scales, you will find them on the product page.