Hoppa till innehåll
Free shipping on orders over 3000 SEK excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The glare on the metal surface hides the scratch: how the polarizer in a handheld digital microscope reveals what a loupe and the eye missShiny solder joints and uneven surfaces: how to get a measurable image without glare and blurry edgesLive Full HD Image Straight on the Screen: Skip the Computer When Inspecting Small DetailsThe measurement field no one sees: when magnification is entered by hand, the measurement goes wrongFrom suspected damage to a measurable image: a digital microscope that works with or without a computerSharp images and measurements on an uneven, glossy surface: how to solve what a magnifier and the naked eye can’tReflections hide the defect: how to inspect shiny metal and plastic surfaces without glareReflections in shiny metal hide the flaw: how to see the surface with polarized light and measure directly in the imageCrack magnifier with a stainless steel scale: how to tell whether the crack is 0.2 mm or 0.4 mmMeasurement errors in microscope images often start with a magnification that someone forgot to recordVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The glare on the metal surface hides the scratch: how the polarizer in a handheld digital microscope reveals what a loupe and the eye missShiny solder joints and uneven surfaces: how to get a measurable image without glare and blurry edgesLive Full HD Image Straight on the Screen: Skip the Computer When Inspecting Small DetailsThe measurement field no one sees: when magnification is entered by hand, the measurement goes wrongFrom suspected damage to a measurable image: a digital microscope that works with or without a computerSharp images and measurements on an uneven, glossy surface: how to solve what a magnifier and the naked eye can’tReflections hide the defect: how to inspect shiny metal and plastic surfaces without glareReflections in shiny metal hide the flaw: how to see the surface with polarized light and measure directly in the imageCrack magnifier with a stainless steel scale: how to tell whether the crack is 0.2 mm or 0.4 mmMeasurement errors in microscope images often start with a magnification that someone forgot to record

Crack Microscope with Stainless Steel Scale: When You Need to Measure a Crack in Concrete — Not Just See It

Published 1 July 2026 at 11:22

Anyone can spot a crack. But the deciding question is rarely is there one? — it’s how wide is it? A 0.1 mm hairline crack in a concrete wall can be completely harmless. A 0.3 mm crack in the same wall can indicate structural movement that requires action. The difference between the two isn’t settled by gut feeling — it’s settled by measurement.

What a crack magnifier actually is

The RL-10 crack magnifier with 10x magnification is built for exactly that job. It’s a handheld, metal-housed instrument with a distortion-free (aplanatic) lens — not the cheaper, edge-blurring glass found in an ordinary magnifying glass. The critical detail, however, is the scale: an etched stainless steel scale with 0.1 mm graduation, mounted in the base at a 45° angle.

RL-10 crack magnifier with 10x magnification and stainless steel scale

Why the scale is steel — not glass

Most measuring magnifiers have glass scales. Glass is cheap, easy to graduate accurately and looks good on an office desk. But in real inspection environments — concrete surfaces, steel structures, workshop floors — glass scales get scratched. After three months of use, you have a scale where every reading is uncertain because of scratches and matte patches.

The etched steel scale is virtually indestructible. The 45° angled layout lets light in without creating glare — so the reading stays clear even when you’re standing in a half-shaded stairwell, crouched in front of a pillar, with nothing but a flashlight and the light filtering in through the window. That matters when the job is to come back with a credible answer.

Where it really comes into its own

Construction engineering and inspection: Measuring cracks in concrete, brick and plaster. Structural engineers work with defined limit values — often 0.2 or 0.3 mm for static cracks — and need instruments that can distinguish at the 0.1 mm level. An ordinary magnifying glass won’t do.

Manufacturing industry: Inspecting the cutting edges of drill bits and milling tools. A dull or cracked cutting insert can ruin an entire production run — detecting the problem before the run starts is a direct cost saving. The crack magnifier’s 10 mm working distance and 20 mm field of view are tailored for exactly this kind of inspection.

Metallurgy and weld inspection: Surface cracks in welded joints, the onset of corrosion, early-stage material fatigue. In the field, far from the lab, the crack magnifier is often the only measuring instrument the inspector has on hand.

Damage assessment and insurance claims: When a crack in a property needs to be documented for an insurance report or a court ruling, a measurement made with a calibrated instrument carries great weight. A photograph with a scale in the frame — as this crack magnifier makes possible — is a documentation standard.

What you get for your money

Aplanatic lens (36 grams), etched stainless steel scale with 0.1 mm graduation (line width 0.02 mm), height-adjustable sliding focus, 20 mm field of view, 10 mm working distance, plastic case and stainless steel graduation at a 45° angle. The instrument is small enough to carry around a construction site all day and rugged enough to survive being carried.

Replacement scales are also available separately — a tool built to last for decades, not just a season.

Read more: RL-10 crack magnifier with 10x magnification in the shop →

More news

All news